Test methods for disposable virus sampling tubes.

1 . According to the sampling needs, disposable virus sampler collects samples with a sampling swab.

2 . Put the sampling swab into the sampling tube, fold the swab rod at the break point and tighten the disposable virus sampling cap.

3 . Disposable virus sampler label with sampling information.

Specific operations for sampling tube sampling.

1 ) Prepare a glass of water, drink about 50 ml of water to rinse and gargle fully, spit out for about 10 seconds, and repeat this step 2 times.

2 )After gargling, do not drink, eat, smoke, etc. for 30 minutes.

3 ) Remove the outer packaging of the sampling tube, tear open the swabber package at the arrow mark and remove the swab (hold the swab less than half the distance of the swab).

4 ) Place the swabber head into the left side of the mouth and use brushing force to move the swabber head up and down to the inner wall of the left cheek while rotating the swabber to scrape as many oral cells as possible, and repeat the action for 30 minutes.

5 ) Place the front end of the swab 2-3 cm into the sampling tube and fold the wiper bar.

6 ) Place another swab into the right side of the mouth and repeat step 2 ) to scrape the oral cells from the inner wall of the right cheek.

7 ) Place the front end of the swab 2-3 cm into the sampling tube and fold the wiper stem.

8 ) Fasten the valve cover.

Ltd. is a medical company dedicated to the development, production and sales of genetic sampling swabs, sterile swabs, cell preservation solution, saliva collection devices and other products. The factory is equipped with a 100,000-grade clean factory and its own 10,000-grade laboratory. In recent years, the company has increased its investment in independent research and development, introduced high-tech talents and technologies, and also established close medical cooperation with many scientific research institutes at home and abroad.