News

The use of Huarui Kang oral sampling tube

Author: Site Editor Publish Time: 2020-01-15 Origin: Site

 

Oral sampling tube should pay attention to the problem

 

1. Store at room temperature and send for examination within 5 days.

 

2 . This product is only used for in vitro diagnosis

 

3 . This product is only for trained people .

 

4 . When using this product, protective measures must be taken by wearing gloves and a mask.

 

5 . Waste sample collection solution should be sterilized

 

6 . It is forbidden to use the sample preserving solution when it is found to be expired, preserving solution mud, leaking solution, etc.

 

7 . Prohibit the use of sample wipers when the package is found to be broken.

 

Product Features

 

1 . The sample taking swab is made of flocked swab. Compared with the usual fiber wipers, the sample is easily captured by the gap within the fiber block, i.e., the sample penetrates, dilutes, and is captured within the fiber. The flocked swab uses a unique jet implanted nylon fleece technology, which has excellent sample capture and release, with a release rate of 90%, much higher than fiber swabs.

 

2 . Preservative solution is available in virus inactivated and non-inactivated types.

 

The examination method of disposable oral sampling tube.

 

1 . Disposable oral sampling tube before sampling, the relevant sample information is displayed on the label of the sampling tube.

 

2 . Disposable oral sampling tube according to the different sampling requirements, sampling swabs in the nasopharynx.

 

3 . The specific sampling method of disposable oral sampling tube is as follows.

 

a nasal swab: insert the head of the swab gently into the nasal palate in the nasal tract, and leave it for a while and then slowly turn to withdraw. Use another swab to wipe away the other nostril, dip the head of the swab in the sampling solution and throw away the tail.

 

b Pharyngeal swab: wipe both sides of the pharyngeal tonsils and the posterior pharyngeal wall with the swab, again dipping the head of the swab in the sampling solution and discarding the tail.

 

4 . Place the swab quickly into the sampling tube.

 

5 . Fold the part of the sampling swab that is higher than the sampling tube and tighten the cap.

 

6 . Freshly collected clinical specimens should be transported to the laboratory within 2~8, 48h.

 

1. Store at room temperature and send for examination within 5 days.

 

2 . This product is only used for in vitro diagnosis

 

3 . This product is only for trained people .

 

4 . When using this product, protective measures must be taken by wearing gloves and a mask.

 

5 . Waste sample collection solution should be sterilized

 

6 . It is forbidden to use the sample preserving solution when it is found to be expired, preserving solution mud, leaking solution, etc.

 

7 . Prohibit the use of sample wipers when the package is found to be broken.

 

Product Features

 

1 . The sample taking swab is made of flocked swab. Compared with the usual fiber wipers, the sample is easily captured by the gap within the fiber block, i.e., the sample penetrates, dilutes, and is captured within the fiber. The flocked swab uses a unique jet implanted nylon fleece technology, which has excellent sample capture and release, with a release rate of 90%, much higher than fiber swabs.

 

2 . Preservative solution is available in virus inactivated and non-inactivated types.

 

The examination method of disposable oral sampling tube.

 

1 . Disposable oral sampling tube before sampling, the relevant sample information is displayed on the label of the sampling tube.

 

2 . Disposable oral sampling tube according to the different sampling requirements, sampling swabs in the nasopharynx.

 

3 . The specific sampling method of disposable oral sampling tube is as follows.

 

a nasal swab: insert the head of the swab gently into the nasal palate in the nasal tract, and leave it for a while and then slowly turn to withdraw. Use another swab to wipe away the other nostril, dip the head of the swab in the sampling solution and throw away the tail.

 

b Pharyngeal swab: wipe both sides of the pharyngeal tonsils and the posterior pharyngeal wall with the swab, again dipping the head of the swab in the sampling solution and discarding the tail.

 

4 . Place the swab quickly into the sampling tube.

 

5 . Fold the part of the sampling swab that is higher than the sampling tube and tighten the cap.

 

6 . Freshly collected clinical specimens should be transported to the laboratory within 2~8, 48h.

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message