Use method

1. sample information on the label before sampling.

2. sampling with a sampling swab at the appropriate site according to different experimental purposes.

3. after sampling, quickly place the swab into the disposable virus sampling tube, break it when broken at the point, and tighten the cap.

Virus sampling tube which is good

4. the newly collected specimen can be transported to the laboratory at room temperature.

5. Specific sampling methods are as follows.

a) nasal collection: insert the swab head gently into the nasal cavity for sampling, use another swab, collect another nasal sample in the same way, and dip the swab head into the fractured tail; of the sampling solution

(b) pharynx with a swab, together: a pharyngeal sample was collected and the swab head was invaded to the fracture tail in the sampling solution

iii. Preventive measures

1. Store at room temperature and send for testing within five days.

2. This product is intended for in vitro diagnosis only

3. This product is only for trained personnel

4. When using this product, gloves and mask should be worn to take protective measures

5. Waste sample collection fluid, should be sterilized

6. If the sample storage solution is found to be expired, cloudy or leaking, it is prohibited to use

7. If the packaging of the sampling swab is found to be damaged, the use should be prohibited
Disposable virus sampling tube

IV. Product characteristics

1. Flocked swabs are used for sampling of swabs compared with traditional swabs, fibers, samples are easily captured by the interstices in the fiber mass, that is, the sample is penetrated, diluted and intercepted in the fiber. Flocked swabs use a unique nylon fleece injection implantation technology that provides excellent sample collection and release, with a release rate of up to 90%, much higher than swabbing fibers